LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1448 (HVAC Systems - General Servicing) >> Repair Instructions >> Blower Motor Resistor Replacement - Auxiliary >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear HVAC module assembly. Refer to HVAC Module Replacement - Auxiliary .
    Fig 1: Blower Motor Control Processor-Auxiliary
    GM814581Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the blower motor control processor-auxiliary (3).
  3. Remove the screws from the blower motor control processor-auxiliary (3).
  4. Remove the blower motor control processor-auxiliary (3).
  5. Remove the thermal gasket from the evaporator core-auxiliary surface.
scientia non olet · About LEMON Manuals