LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1448 (HVAC Systems - General Servicing) >> Repair Instructions >> Blower Motor Replacement - Auxiliary (Front Auxiliary) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Auxiliary Blower Motor
    GM735942Courtesy of GENERAL MOTORS CORP.
  1. Install the blower motor-auxiliary (3).
  2. NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  3. Install the retaining screws (2, 5) to the blower motor-auxiliary.

    Tighten:  Tighten the screws to 10 N.m (88 lb in).

  4. Install the air outlet duct to the blower motor-auxiliary.
  5. Connect the electrical connectors (4) to the blower motor-auxiliary (3).
  6. Install the HVAC module assembly. Refer to HVAC Module Assembly Replacement .