LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1445 (Hydraulic Brake System) >> Diagnostic Information and Procedures >> Brake Pedal Excessive Travel

Brake Pedal Excessive Travel

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Brake Pedal Excessive Travel Diagnostic Test

Step Action Yes No
1 Were you sent here from the Hydraulic Brake Symptom table? Go to Step 2  Go to Diagnostic Starting Point - Hydraulic Brakes 
2 Inspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .
Is the brake pedal travel distance within the acceptable limits?
Go to Step 5  Go to Step 3 
3
  1. Inspect for worn, missing, misaligned, bent or damaged brake pedal system components.
    • For the brake pedal pushrod component inspection, refer to Brake Pedal Pushrod Inspection .
    • Inspect the brake pedal bushings for excessive wear and/or damage and inspect the brake pedal for a misaligned, bent, and/or damaged condition.
  2. Replace the brake pedal system components that are worn, missing, misaligned, bent or damaged. Refer to the following procedures as necessary:
Did you find and replace any worn, missing, misaligned, bent or damaged brake pedal system components?
Go to Step 4  Go to Step 5 
4 Inspect for proper brake pedal travel. Refer to Brake Pedal Travel Measurement and Inspection .
Is the brake pedal travel distance within the acceptable limits?
Go to Step 8  Go to Step 5 
5 Inspect the hydraulic brake system for proper operation. Refer to Hydraulic Brake System Diagnosis .
Did you find and correct a condition?
Go to Step 8  Go to Step 6 
6 Inspect the disc brake system for proper operation. Refer to Disc Brake System Diagnosis .
Did you find and correct a condition?
Go to Step 8  Go to Step 7 
7 Inspect the brake assist system for proper operation. Refer to Brake Assist System Diagnosis .
Did you find and correct a condition?
Go to Step 8  Go to Diagnostic Starting Point - Hydraulic Brakes 
8 Road test the vehicle to confirm proper operation. Refer to Brake System Vehicle Road Test .
Is the condition still present?
Go to Step 2  System OK