Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the engine flywheel. Refer to Engine Flywheel Replacement .
- Remove the oil pan-to-rear cover bolts (1).
- Remove the rear cover bolts.
- Remove the rear cover and gasket.
- Discard the rear cover gasket.
- Clean and inspect the rear cover. Refer to Engine Rear Cover Cleaning and Inspection .