LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1444 (Engine Mechanical - 5.3L (Lm4)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Cylinder Head Replacement - Left >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Rear A/C Lines
    GM871567Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice .
  1. If equipped, install the auxiliary A/C bracket bolt (5).

    Tighten:  Tighten the bolt to 20 N.m (15 lb ft).

  2. Install the pushrods. Refer to Valve Rocker Arm and Push Rod Replacement  .
  3. Install the left exhaust manifold. Refer to Exhaust Manifold Replacement - Left (5.3L Engine) .
  4. Install the coolant air bleed pipe. Refer to Coolant Air Bleed Pipe Assembly Replacement (5.3L Engine) .
  5. Install the generator bracket. Refer to Generator Bracket Replacement (5.3L Engine) .