Valve Rocker Arm Cover Removal - Left
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the ignition coil bracket bolts from the rocker arm cover, if required.
- Remove the ignition coil and bracket assembly from the cover.
- Remove the valve rocker arm cover bolts.
- Remove the valve rocker arm cover.
- Remove the gasket (504) from the cover.
- Discard the gasket.
The bolt grommets may be used again if not damaged.
IMPORTANT:
Do not remove the ignition coils and bracket from the valve rocker arm cover unless required.