Oil Pump, Pump Screen and Deflector Removal
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the oil pump screen bolt (405) and nuts (404).
- Remove the oil pump screen (407) with O-ring seal.
- Remove the O-ring seal (406) from the pump screen.
- Discard the O-ring seal.
- Remove the remaining crankshaft oil deflector nuts.
- Remove the crankshaft oil deflector.
- Remove the oil pump bolts.
- Remove the oil pump.
IMPORTANT:
Do not allow dirt or debris to enter the oil pump assembly. Cap ends as necessary.