Engine Valley Cover Removal
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the knock sensor wire harness.
- Remove the knock sensors.
- Remove the valley cover bolts.
- Remove the valley cover and gasket.
- Discard the valley cover gasket.
- Remove the knock sensor oil seals (520) from the cover (555).