LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1443 (Engine Mechanical - 4.2L (Ll8)) >> Repair Instructions >> On-Vehicle Repair Instructions >> Oil Level Indicator and Tube Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Oil Level Indicator Tube Bracket Nut
    GM754343Courtesy of GENERAL MOTORS CORP.
  1. Remove the A/C line bracket nut.
  2. Remove the A/C line bracket from the oil level indicator tube stud.
  3. Disconnect the O2 sensor electrical connector from the oil level indicator bracket.
    4. Fig 2: View Of Oil Level Indicator Tube Stud
    GM637658Courtesy of GENERAL MOTORS CORP.
  4. Remove the oil level indicator tube stud.
  5. Pull the indicator out of the tube.
  6. Pull the tube out of the block.
scientia non olet · About LEMON Manuals