LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1443 (Engine Mechanical - 4.2L (Ll8)) >> Repair Instructions >> Off-Vehicle Repair Instructions >> Fuel Rail and Injectors Installation

Fuel Rail and Injectors Installation

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Fuel Injector Rail & Bolts
    GM637617Courtesy of GENERAL MOTORS CORP.
  1. Lubricate the lower injector O-rings with mineral oil GM P/N 9981704.
  2. Install the fuel injector rail.
  3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  4. Install the fuel injector rail bolts.

    Tighten:  Tighten the fuel injector rail bolts to 10 N.m (89 lb in).