LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1439 (Bumper System) >> Repair Instructions >> Impact Bar Replacement - Front Bumper >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front fascia. Refer to Fascia Replacement - Front Bumper (Rainier) , Fascia Replacement - Front Bumper (Bravada) , Fascia Replacement - Front Bumper (Envoy, Envoy XUV)  or Fascia Replacement - Front Bumper (TrailBlazer) .
  2. Remove the bolts (1) that retain the fascia support rods (2) to the impact bar (5).
    Fig 1: View Of Fascia-To-Fascia Support Rod Push-Pins
    GM740663Courtesy of GENERAL MOTORS CORP.
  3. Remove the fascia support rods from the impact bar.
  4. Remove the bolts (1) that retain the impact bar to the frame (2).
    Fig 2: Removing Impact Bar-To-Frame Bolts
    GM740662Courtesy of GENERAL MOTORS CORP.
  5. Remove the impact bar (3) from the frame.
  6. Remove the tow hooks from the impact bar. Refer to Tow Hook Replacement - Front (Chevrolet (X88) ONLY) in Frame and Underbody.
scientia non olet · About LEMON Manuals