LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1438 (Frame & Underbody) >> Repair Instructions >> Assist Step Support Bracket Replacement >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
    2. Fig 1: Removing Assist Step
    GM743500Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolts that retain the assist step support brackets to the body.
  3. Remove the assist step assembly from the vehicle.
  4. Place the step assembly on a clean, prepared surface.
    5. Fig 2: Removing Assist Step Support Brackets
    GM750777Courtesy of GENERAL MOTORS CORP.
  5. Remove the nuts (1) that retain the assist step to the support brackets.
  6. Remove the support brackets from the assist step.
scientia non olet · About LEMON Manuals