LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1437 (Exterior Trim) >> Repair Instructions >> Molding Replacement - Rear Panel >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the tail lamp assembly from the vehicle. Refer to Tail Lamp Replacement in Lighting Systems.
    2. Fig 1: Removing Rear Panel Molding
    GM741241Courtesy of GENERAL MOTORS CORP.
  2. Release the 4 tabs that retain the trim to the tail lamp.
  3. Remove the trim from the tail lamp.
scientia non olet · About LEMON Manuals