Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Removing Roof Applique - Rear

Courtesy of GENERAL MOTORS CORP.

Remove the front applique. Refer to Applique Replacement - Roof Front .
Remove the tail lamp. Refer to Tail Lamp Replacement in Lighting Systems.
Place masking tape along the lower edge of the applique in order to protect the painted surfaces and the glass.
Using a long flat-bladed tool, starting at the rear opening, insert the tool between the applique and the fastener and twist the tool in order to release the snap-in fasteners on the rear pillar.

Fig 2: Releasing Applique Fasteners

Courtesy of GENERAL MOTORS CORP.

Lift the rear of the applique upwards and outwards in order to release the remaining fasteners.
Remove the applique.
Inspect the applique and the fasteners for damage.