LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1436 (Retained Accessory Power System) >> Diagnostic Information and Procedures >> DTC B1477: Retained Accessory Power Circuit Low >> Circuit Description

Circuit Description

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

The body control module (BCM) controls some retained accessory power (RAP) functions through the RAP supply voltage circuit. When the ignition switch is in either the ACC or the ON position, the BCM provides battery voltage to the RAP supply voltage circuit.

When the ignition switch turns from ON or ACC to OFF, with all of the vehicle doors closed, the BCM still provides battery voltage to the circuit for 10 minutes, or until any vehicle door opens.