LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Transfer Case - NVG 226-NP8) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement (Chevrolet) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Instrument Panel (I/P) Cluster Bezel
    GM712814Courtesy of GENERAL MOTORS CORP.
  1. Remove the bezel cover. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile/Buick) in Instrument Panel, Gages, and Console
    2. Fig 2: Removing/Installing Control Switch
    GM756019Courtesy of GENERAL MOTORS CORP.
  2. Push in on the two tabs on the side of the control switch.
  3. Move the control switch toward the front of the trim plate.
  4. Disconnect the electrical connector.
  5. Remove the control switch.
scientia non olet · About LEMON Manuals