LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1435 (Transfer Case - NVG 226-NP8) >> Repair Instructions >> Transfer Case Shift Control Switch Replacement (Chevrolet) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Control Switch
    GM756019Courtesy of GENERAL MOTORS CORP.
  1. Install the electrical connector to the control switch.
    2. IMPORTANT: When installing control switch in the trim bezel, a snap should be felt or heard.
  2. Install the control switch in the bezel cover.
    3. Fig 2: View Of Instrument Panel (I/P) Cluster Bezel
    GM712814Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Ensure that the bezel cover is properly seated before installing the trim screws.
  3. Install the bezel cover. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster (Chevrolet) or Bezel Replacement - Instrument Panel (I/P) Cluster (GMC/Oldsmobile/Buick) in Instrument Panel, Gages, and Console
scientia non olet · About LEMON Manuals