Circuit Description
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
The front axle control circuit consists of an electric motor actuator, which engages and disengages the front axle. The front axle actuator motor consists of a permanent magnetic (PM) motor, a worm gear controlled plunger, a front axle switch and an electronic control circuit, all within the actuator assembly.
The front axle actuator consists of the following circuits:
- The front axle control circuit, which is also connected to the transfer case shift control module
- The front axle switch circuit, which is also connected to the transfer case shift control module
- A battery feed circuit
- A ground circuit
When a shift to AUTO 4WD, 4HI, or 4LO is requested, the transfer case shift control module engages the front axle by grounding the front axle control circuit through a current limiting driver.