LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1434 (Transfer Case - NVG 126-NP4) >> Diagnostic Information and Procedures >> Diagnostic System Check - Transfer Case >> Notes

Diagnostic System Check - Transfer Case: Notes

WARNING: This page is about a different car, the 2004 Oldsmobile Bravada and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.

These diagnostic procedures will help you to find and repair Automatic Transfer Case (ATC) system malfunctions. This service category also contains information for repairing ATC system malfunctions. For best results, use the diagnostic tables, and follow the sequence listed below:

  1. Perform the Diagnostic System Check - Transfer Case. All ATC diagnostics must begin with the Diagnostic System Check - Transfer Case.

    The Diagnostic System Check - Transfer Case determines the following:

    • Proper SERVICE AWD indicator operation
    • Ability of the transfer case shift control module to communicate through the Data Link Connector (DLC)
    • Existence of ATC diagnostic trouble codes (DTC)
  2. Refer to the diagnostic table as directed by the Diagnostic System Check - Transfer Case. The diagnostic tables help you to diagnose any ATC system malfunction.

    Bypassing these procedures may result in the following:

    • Extended diagnostic time
    • Incorrect diagnosis
    • Incorrect parts replacement
  3. Repeat the Diagnostic System Check - Transfer Case after you perform any repair or diagnostic procedures. This will verify that you correctly performed the repair and also ensure that no other malfunctions exist.
scientia non olet · About LEMON Manuals