LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1433 (Sunroof System) >> Repair Instructions >> Moveable Roof Panel Actuator Cover Replacement >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Moveable Roof Panel Actuator Cover
    GM1218500Courtesy of GENERAL MOTORS CORP.
  1. Install the actuator cover to the moveable roof assembly by placing it straight down onto the moveable roof assembly.
  2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the screws retaining the actuator cover to the moveable roof module assembly.

    Tighten:  Tighten the actuator cover screws to 4 N.m (35 lb in).

  4. Install the moveable roof panel. Refer to Moveable Roof Panel Assembly Replacement .