Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Place the arm in the mid-wipe position on the rear glass.
- Disconnect the washer hose (4).
- Remove the wiper arm cover (2).
- Disengage the nut (3) retaining the wiper arm to the pivot shaft.
- Remove the wiper arm from the pivot shaft.
- Remove the wiper arm blade from the wiper arm, if necessary. Refer to Wiper Arm Blade Replacement - Rear (TrailBlazer, Envoy) or Wiper Arm Blade Replacement - Rear (XUV) .