Installation Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Position the wiper blade in a horizontal position to the slot (2) in the wiper arm.
- Hold the wiper arm and apply inward pressure to the wiper arm (1) in order to secure the wiper blade (3) to the wiper arm.
- Carefully lower the wiper arm and blade onto the end gate glass.
- Park the rear wiper arm.