LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1430 (Wiper System & Washer System) >> Repair Instructions >> Washer Pump Replacement - Rear >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new sealing grommet into the container. Lubricate the grommet with clean washer solvent.
  2. Fig 1: Locating Windshield Washer Pumps
    GM751557Courtesy of GENERAL MOTORS CORP.
  3. Install the pump (5) to the sealing grommet (3).
  4. Install the pump (5) to the retainer (1) on the solvent container.
  5. Connect the washer hose (4) to the pump (5).
  6. Install the washer solvent container. Refer to Washer Solvent Container Replacement (Envoy, TrailBlazer)  or Washer Solvent Container Replacement (Rainier) .