LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1430 (Wiper System & Washer System) >> Repair Instructions >> Washer Nozzle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Washer Nozzle Retaining Tabs - Front
    GM751560Courtesy of GENERAL MOTORS CORP.
  1. Install the washer nozzles to the air inlet grille panel, by indexing the tab in the air inlet grille panel to the washer nozzle.
  2. Be sure the retaining tabs (1) are secure.
    3. Fig 2: Identifying Windshield Washer Hose Routing
    GM751556Courtesy of GENERAL MOTORS CORP.
  3. Install the washer hose connection (1) to the washer nozzle.
  4. Install the air inlet grille panel. Refer toAir Inlet Grille Panel Replacement (Envoy, TrailBlazer) or Air Inlet Grille Panel Replacement (Rainier) in Body Front End.
  5. Install the wiper arms. Refer to Wiper Arm Replacement .
scientia non olet · About LEMON Manuals