LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1429 (Seat Belt System) >> Repair Instructions >> Seat Belt Replacement - Rear (Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear seat belt upper guide shoulder bolt.
  2. Remove the upper body lock pillar trim panel. Refer to Trim Panel Replacement - Body Lock Pillar Upper (Envoy XUV) in Interior Trim.
  3. Fig 1: Removing/Installing Upper Rear Seat Belt Guide Bolt
    GM1245332Courtesy of GENERAL MOTORS CORP.
  4. Remove the bolt that retains the upper rear seat belt upper guide to the body.
  5. Fig 2: Removing/Installing Rear Seat Belt Floor Anchor Bolt
    GM1245340Courtesy of GENERAL MOTORS CORP.
  6. Remove the rear seat belt floor anchor bolt.
  7. Fig 3: Removing/Installing Rear Seat Belt Retractor Assembly
    GM1245345Courtesy of GENERAL MOTORS CORP.
  8. Remove the bolt that retains the rear seat belt retractor assembly to the body.
  9. Remove the rear seat belt retractor assembly from the vehicle.