LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1429 (Seat Belt System) >> Repair Instructions >> Seat Belt Buckle Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Seat Belt Buckle
    GM755837Courtesy of GENERAL MOTORS CORP.
  1. Install the seat belt buckle to the seat assembly.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the nut (1) which retains the seat belt buckle to the seat assembly.

    Tighten:  Tighten the front seat belt buckle nut to 52 N.m (38 lb ft).

    3. Fig 2: Identifying Connectors & Harness
    GM752865Courtesy of GENERAL MOTORS CORP.
  3. Connect the seat belt reminder wiring harness (3) on the driver's seat.
  4. Install the front seat assembly. Refer to Seat Replacement - Front Bucket in Seats.
scientia non olet · About LEMON Manuals