Fasten Safety Belt Indicator/Chime Inoperative
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fasten Safety Belt Indicator/Chime Inoperative
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Seat Belt Schematics Connector End View Reference: Seat Belt Connector End Views |
|||
| 1 | Did you review the Diagnostic Starting Point - Seat Belts? | Go to Step 2 | Go to Diagnostic Starting Point - Seat Belts |
| 2 | Did you perform the Diagnostic System Check - Instrument Cluster ? | Go to Step 3 | Go to Diagnostic System Check - Instrument Cluster |
| 3 |
|
Go to Symptoms - Seat Belts | Go to Step 4 |
| 4 | With a scan tool, observe the Driver Side Belt Status parameter in the SIR scan tool data list while buckling and unbuckling the driver seat belt. Does the seat belt parameter change state? |
Go to Step 8 | Go to Step 5 |
| 5 | Test the signal circuit of the seat belt switch for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 6 |
| 6 | Test the ground circuit of the seat belt switch for an open or high resistance. Refer to Circuit Testing
and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 7 |
| 7 | Test the seat belt switch for an open or high resistance. Does the seat belt switch have an open or high resistance? |
Go to Step 9 | Go to Step 10 |
| 8 | Replace the IPC. Refer to Instrument Panel Cluster (IPC) Replacement
in Instrument Panel, Gages and Console. Did you complete the replacement? |
Go to Step 11 | - |
| 9 | Replace the LF seat belt switch. Refer to Seat Belt Buckle Replacement - Front . Did you complete the replacement? |
Go to Step 11 | - |
| 10 | Replace the inflatable restraint sensing and diagnostic module (SDM). Refer to Inflatable Restraint Sensing and Diagnostic Module Replacement
. Did you complete the replacement? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 2 |