LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1426 (Accessory Power Socket) >> Repair Instructions >> Accessory Power Receptacle Replacement - 12 Volt - Rear Quarter Trim >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the outlet assembly properly indexed to the body side trim panel.
    2. Fig 1: Installing Threaded Ring & Lock Washer Onto Accessory Power Receptacle (Rear)
    GM1381892Courtesy of GENERAL MOTORS CORP.
  2. Install the lock washer and threaded ring.
    3. Fig 2: Connecting Accessory Power Receptacle (Rear) Electrical Connector
    GM1381893Courtesy of GENERAL MOTORS CORP.
  3. Connect the electrical connector.
  4. Install the body side trim panel. Refer to cell Trim Panel Replacement - Body Side (Envoy XUV) in Interior Trim.
scientia non olet · About LEMON Manuals