LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Wiring Harness Replacement - Midgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
  2. Remove the midgate window. Refer to Window Replacement - Midgate .
  3. Remove the midgate window regulator. Refer to Window Regulator Replacement - Midgate .
    4. Fig 1: Disconnecting Midgate Electrical Connectors
    GM986488Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the following electrical connectors:
    • Midgate latches
    • Midgate window position switch
    • Midgate latch release switch
    • Midgate harness to body harness
  5. Release the midgate wiring harness retainers from the midgate structure.
  6. Remove the midgate wiring harness from the midgate.
scientia non olet · About LEMON Manuals