LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Window Run Channels Replacement - Endgate Lower >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Swing open the endgate.
  2. Remove the endgate trim panel. Refer to Trim Panel Replacement - Endgate (Envoy XUV) .
  3. Remove the inner reinforcement panel. Refer to Reinforcement Inner Panel Replacement - Endgate .
  4. Remove the window. Refer to Window Replacement - Endgate .
    5. Fig 1: Removing Endgate Lower Window Run Channels
    GM903141Courtesy of GENERAL MOTORS CORP.
  5. Remove the screws retaining the run channels to the endgate.
  6. Remove the run channels from the endgate.
scientia non olet · About LEMON Manuals