Removal Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the bolt that retains the wheelhouse panel to the rocker panel molding.
- Remove the 2 screws that retain the wheelhouse panel to the rear fascia.
- Remove the 4 push-pins retaining the wheelhouse panel to the wheelhouse.
- Remove the wheelhouse panel from the vehicle.