LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Weatherstrip Replacement - Endgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the endgate.
  2. Open the moveable roof.
    3. Fig 1: Removing Endgate Weatherstrip
    GM1229210Courtesy of GENERAL MOTORS CORP.
  3. Remove the push-pins (2) retaining the endgate weatherstrip upper mold from the moveable roof module.
  4. Remove the endgate weatherstrip from the bulb flange from the moveable roof module.
  5. Remove the push-pins retaining the endgate weatherstrip lower molds (1) to the back of the vehicle.
  6. Remove the weatherstrip from the endgate opening flange.
scientia non olet · About LEMON Manuals