LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Trim Panel Replacement - Liftgate (TrailBlazer, Envoy, Bravada) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Push-Pin Retainer From Trim Panel
    GM769633Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate window.
  2. Remove the push-pin retainer from the trim panel.
  3. Close the liftgate window.
  4. Open the liftgate.
  5. Remove the screw that retains the pullstrap to the liftgate trim panel.
  6. Remove the pullstrap from the liftgate trim panel.
  7. Use a flat-bladed tool in order to carefully release the trim panel retainers.
  8. Remove the trim panel from the liftgate.
    Fig 2: Removing Trim Panel From Liftgate
    GM721369Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals