LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Torque Rod Replacement - Endgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Torque Rod - Endgate
    GM1229170Courtesy of GENERAL MOTORS CORP.
  1. Swing open the endgate.
  2. Remove the bolts retaining the torque rod to the endgate.
  3. Remove the torque rod from the endgate and hinge assembly.
scientia non olet · About LEMON Manuals