LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Sealing Strip Replacement - Midgate Window Outer >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Lower the midgate window.
  2. Release the midgate latches, opening the midgate until the holes in the hinge assembly are aligned.
  3. Install 5 mm (0.20 in) pins (2) or an allen wrench through the holes in each hinge (1) to support the midgate.
    Fig 1: Supporting Midgate
    GM1236621Courtesy of GENERAL MOTORS CORP.
  4. Carefully remove the midgate window sealing strip from the flanges of the midgate.
    Fig 2: Removing Midgate Window Sealing Strip - Outer
    GM986352Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals