LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Sealing Strip Replacement - Endgate Window - Outer >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the endgate window sealing strip to the endgate.
    Fig 1: Installing Endgate Window Sealing Strip - Outer
    GM902560Courtesy of GENERAL MOTORS CORP.
  2. Locate the integral clip on the sealing strip to the notch in the outer pinch-weld flange.
  3. Seat the sealing strip onto the pinch-weld flanges starting in the center working outboard.
scientia non olet · About LEMON Manuals