LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Prop Rod Replacement - Endgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Endgate Prop Rod
    GM902556Courtesy of GENERAL MOTORS CORP.
  1. Open the endgate.
  2. Remove the endgate prop rod (3) from the retainer clip (2).
  3. Remove the bolt retaining the proper rod (3) to the endgate.
  4. Remove the prop rod retaining bolts (1) from the body.
scientia non olet · About LEMON Manuals