LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Opening the Liftgate When There Is an Electrical Failure

Opening the Liftgate When There Is an Electrical Failure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Accessing Bellcrank Lever
GM1575716Courtesy of GENERAL MOTORS CORP.
Opening the Liftgate When There Is an Electrical Failure

Callout Component Name
Fastener Tightening Specifications:  Refer to Fastener Tightening Specifications  .
1 Plug, Liftgate Trim Panel
Tip: 
  1. Use a small flat-bladed tool to remove the plug from the trim panel.
  2. Push down on the black bellcrank lever, through the access hole, to unlock the liftgate.
  3. Open the liftgate using the outside handle.