LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Lock Cylinder Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Liftgate Lock Cylinder
    GM721379Courtesy of GENERAL MOTORS CORP.
  1. Install the lock cylinder to the liftgate.
  2. Install the C clip to the groove in the lock cylinder.
  3. Fig 2: Installing Lock Rod To Liftgate Lock Cylinder
    GM721374Courtesy of GENERAL MOTORS CORP.
  4. Install the lock rod to the lock cylinder.
  5. Install the trim panel. Refer to Trim Panel Replacement - Liftgate (TrailBlazer, Envoy, Bravada)  or Trim Panel Replacement - Liftgate (TrailBlazer EXT, Envoy XL) .