LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Hinge Replacement - Midgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the midgate assembly from the vehicle. Refer to Midgate Replacement .
  2. Remove the midgate inner panel. Refer to Midgate Panel Replacement - Inner .
  3. Remove the midgate regulator assembly. Refer to Window Regulator Replacement - Midgate .
    4. Fig 1: Identifying Midgate Hinges & Midgate Hinge Reinforcements
    GM1033740Courtesy of GENERAL MOTORS CORP.
  4. Mark the position of the midgate hinges (2) using a grease pencil.
  5. Mark the position of the midgate hinge reinforcements (1) using a grease pencil.
  6. Remove the nuts retaining the midgate hinges to the midgate.
  7. Remove the hinge assembly (2) from the midgate.
scientia non olet · About LEMON Manuals