LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Handle Replacement - Liftgate >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the license plate pocket. Refer toLicense Plate Pocket Replacement (Envoy XUV)  or License Plate Pocket Replacement (All Except Envoy XUV) .
  2. Cut the crimped end off the liftgate handle pin.
    Fig 1: Cutting Crimped End Off Liftgate Handle Pin
    GM1339999Courtesy of GENERAL MOTORS CORP.
  3. Remove the liftgate handle pin.
  4. Remove the liftgate handle.
    5. Fig 2: Removing Liftgate Handle Lever Bracket
    GM1340031Courtesy of GENERAL MOTORS CORP.
  5. Remove the liftgate handle lever bracket.
    6. Fig 3: Removing Liftgate Handle Spring
    GM1340003Courtesy of GENERAL MOTORS CORP.
  6. Remove the liftgate handle spring.
scientia non olet · About LEMON Manuals