LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1422 (Body Rear End) >> Repair Instructions >> Garnish Molding Replacement - Liftgate >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Installing Garnish Molding To Liftgate
    GM1363303Courtesy of GENERAL MOTORS CORP.
  1. Install the garnish molding to the liftgate.
  2. Ensure that the top 4 garnish molding retainers are fully seated first.
  3. Install the 2 garnish molding retainers on each side.
scientia non olet · About LEMON Manuals