LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1419 (Body Front End) >> Repair Instructions >> Hood Latch Adjustment >> Adjustment Procedure

Adjustment Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Hood Latch-To-Support Bracket Bolts
    GM749964Courtesy of GENERAL MOTORS CORP.
  1. Loosen the bolts retaining the hood latch to the support bracket.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Move the hood latch from side to side until the striker enters the center of the latch assembly.

    Tighten:  Tighten the bolts retaining the hood latch to the support bracket to 10 N.m (89 lb in).

scientia non olet · About LEMON Manuals