LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1417 (Supplemental Inflatable Restraint System) >> Repair Instructions >> Inflator Module Handling and Scrapping >> General Information and Terms

General Information and Terms

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.

Do NOT deploy the inflator module in the following situations:

Deployment Procedures

The inflator module can be deployed inside or outside of the vehicle. The method used depends upon the final disposition of the vehicle. Review each procedure in order to determine which will work best in a given situation.

Dual Stage Inflator Module

Dual stage inflator modules have 2 deployment stages. If stage 1 was used to deploy a dual stage inflator module, stage 2 may still be active. Therefore, a deployed inflator module must still be treated as an active inflator module. If disposal of a deployed or undeployed dual stage module is required, both deployment loops must be energized to deploy the inflator module.

Scrapping Procedure

During the course of a vehicle's useful life, certain situations may arise which will require the disposal of a undeployed inflator module. Do not dispose a undeployed inflator module through normal disposal channels until the inflator module has been deployed. If scrapping a deployed dual stage inflator module, both stages must be energized. The following information covers the proper procedures for the disposing of a undeployed inflator module.

Fig 1: View Of Proper Handling Of Undeployed Inflator Module
GM9039Courtesy of GENERAL MOTORS CORP.
Undeployed Inflator Module

Take special care when handling or storing a undeployed or live inflator module. An inflator module deployment produces a rapid generation of gas. This may cause the inflator module, or an object in front of the inflator module, to project through the air in the event of an unlikely deployment.