Conditions for Setting the DTC
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
- DTC B0040 will set when the side-impact module-LF deployment loop resistance is less than 1.3 ohms for 500 milliseconds.
- DTC B0041 will set when one of the following conditions occurs:
- A side-impact module-LF high circuit is less than 2.4 volts and the side-impact module-LF deployment loop is more than 6 ohms for 500 milliseconds.
- A side-impact module-LF deployment loop resistance is more than 4.8 ohms for 500 milliseconds.
- DTC B0045 will set when one of the following conditions occur:
- A side-impact module-LF high and/or low circuits is short-to-ground or short-to-voltage for 500 milliseconds.
- A side-impact module-LF high circuit is less than 2.4 volts, and the side-impact module-LF deployment loop resistance is less than 6 ohms for 500 milliseconds.