LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1416 (Engine Control System - 4.8L, 5.3L, & 6.0L - Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Chassis >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: EVAP/Fuel Hose/Pipe Assembly
    GM731899Courtesy of GENERAL MOTORS CORP.
  1. Install the EVAP purge pipe (3) from the EVAP/fuel hose/pipe assembly.
  2. Install the evaporative emission (EVAP)/fuel hose/pipe assembly. Refer to Fuel Hose/Pipes Replacement - Chassis .
scientia non olet · About LEMON Manuals