Removal Procedure
WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
- Disconnect the evaporative emission (EVAP) canister vent valve electrical connector (2).
- Disconnect the EVAP vent pipe from the canister vent valve.
- Disengage the bracket retaining tab and remove the EVAP canister vent valve.