LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Rear Quarter Upper (TrailBlazer, Envoy, Bravada) >> Installation Procedure

Installation Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the rear upper quarter trim panel to the vehicle.
    Fig 1: Identifying Trim Panel - Rear Quarter Upper (TrailBlazer, Envoy, Bravada)
    GM740432Courtesy of GENERAL MOTORS CORP.
  2. Install the seat belt retractor to the body.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the bolt that retains the rear seat belt upper guide to the body.

    Tighten:  Tighten the rear seat belt upper guide shoulder bolt to 70 N.m (52 lb ft).

  4. Install the screw that retains the rear upper quarter trim panel to the body.

    Tighten:  Tighten the rear upper quarter trim panel screw to 2 N.m (18 lb in).

  5. Install the cargo net retaining knobs.
scientia non olet · About LEMON Manuals