LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Trim Panel Replacement - Body Lock Pillar Upper (Envoy XUV) >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the lower body lock pillar trim panel. Refer to Trim Panel Replacement - Body Lock Pillar Lower (Envoy XUV) .
    Fig 1: Identifying Trim Panel - Body Lock Pillar Upper (Envoy XUV)
    GM1236739Courtesy of GENERAL MOTORS CORP.
  2. Remove the rear seat belt lower anchor bolt. Refer to Seat Belt Replacement - Rear (TrailBlazer, Envoy, Bravada) , Seat Belt Replacement - Rear (TrailBlazer EXT, Envoy XL) or Seat Belt Replacement - Rear (Envoy XUV) .
  3. Pull the trim panel away from the lock pillar to disengage clips.
  4. Pull the seat belt webbing through the slot in the panel to remove.
  5. Remove the trim panel from the vehicle