LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2002 >> Blazer 4D Utility, 4WD, Part Time >> Repair and Diagnosis >> External Pages >> Different car >> Section 1410 (Interior Trim) >> Repair Instructions >> Trim Cover Replacement - Rear Floor Trim Panel >> Removal Procedure

Removal Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Oldsmobile Bravada, 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 GMC Envoy, and 2004 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Accessing Trim Cover Retaining Clips
    GM1381742Courtesy of GENERAL MOTORS CORP.
  1. Lower the midgate.
  2. Fold the hinged midgate filler trim panel (2) back.
  3. Release the trim cover retaining clips (1) from the sheet metal.
  4. Fig 2: Removing/Installing Rear Floor Trim Panel
    GM1236701Courtesy of GENERAL MOTORS CORP.
  5. Raise the midgate to the closed position.
  6. Remove the rear floor trim panel by grasping and pulling straight out to release the retaining clips.
  7. Remove the rear floor trim panel from the vehicle